7 Specialist Solutions for a Heater That Is Blowing Cold Air

image

That's unusual. Your heater is on ... but your furnace is blowing cold air. Actually bad news, on a freezing winter day in Calgary, Alberta

Fortunately is that there is aid readily available for your heating system problem. Have a look at these 7 services for a heater blowing cold emergency furnace repair calgary air.

Inaccurate Thermostat Setting:

You thought you set the thermostat to a comfortable temperature. However, in some cases you're warm and other times you feel a definitely chilly breeze coming out of the vents. Confirm the thermostat. It might be set to ON, which implies that the fan will run all the time, even when the heating system is cycling off.

OPTION: Modification the setting to VEHICLE.

Other Thermostat Issues:

Your thermostat may be causing difficulty for other factors. 1) If it is battery powered, the battery may have diminished. OR 2) If you just installed a new thermostat yourself, you might have bought a type that does not work with your system.

SOLUTION: 1) Replace the battery. OR 2) Seek advice from a HEATING AND COOLING expert to see whether the brand-new thermostat is, undoubtedly, incompatible with your heating unit.

Dirty Air Filter:

Is your heater often shutting on and off? Your air filter may have become stopped up. When airflow to a gas heater is restricted due to an obstructed air filter, the security switch will eventually shut down the burners. Since no hot air is being produced, your fan will begin blowing cold air.

SERVICE: Modification the filter, if it's the non reusable kind. Or, clean an irreversible filter. (Learn how often to change your furnace filter.).

Clogged Condensate Line:.

As a by-product of their function, high-efficiency heaters produce condensed liquid. This condensate normally drains harmlessly away. Occasionally, however, the condensate drain line blocks, resulting in a heater blowing cold air and leaking water.

SERVICE: Contact a heating and cooling service technician to clean the condensate line.

Pilot Light Is Out:.

Your pilot burner may be out for one of two reasons. Either it has merely blown out, or it is not lighting correctly in the first place. The latter problem may be because of clog from dirt and soot, or a malfunctioning thermocouple.

SOLUTION: You may wish to attempt relighting the pilot light yourself ... verrry thoroughly. If it will not light or it goes out within a minute or two, it's time to call an A/C pro.

Inadequate furnace service Gas Supply:.

Certainly, a gas heating system requires an appropriate supply of gas to work properly. Was your gas supply turned off for any factor? Is your gas valve closed? If the answer to both questions is unfavorable, an obstructed line could be interfering with the circulation of gas.

SERVICE: Discover a furnace repair work expert to examine and repair the gas line.

Dripping Ducts:.

Older ductwork tends to develop cracks and leakages as a result of wear and tear. Despite the fact that the system is really blowing warm air, heat is dripping out prior to it ever reaches you, so you end up sensation as if your heating system is blowing cold air.

SOLUTION: Have a professional conduct duct sealing for you.

Stay Easily Warm This Winter.

Contact a regional A/C expert to make sure that your home comfortable 24/7 this winter.